It's quite annoying when your USB transfer speed is extremely slow and you have a large size of files to transfer. To get your trouble off, we will show you the effective ways to vastly speed up your USB transfer. If you get your data lost during data transfer, recover your files immediately using EaseUS Data Recovery Wizard.

• How To Transfer Hard Drives
• Transfer Files From Phone To Hard Drive Backup

After you connect your phone to your computer, a notification will let you prepare it for transferring files. Tap the notification and select 'Transfer files' or 'File transfer' in the menu that.

Learn how to easily transfer files to and from your phone using only the SanDisk Extreme Portable SSD. No computer needed!How to reformat your SanDisk Extrem. After you connect your phone to your computer, a notification will let you prepare it for transferring files. Tap the notification and select 'Transfer files' or 'File transfer' in the menu that. If you need your files to be stored somewhere outside of your Windows 10 computer for safekeeping, a flash drive is a good option. Follow these simple steps to copy files to or from a flash drive: Insert the flash drive into one of your computer’s USB ports. Laptops, like cameras, often have a slot.

• Reading Duration: 3-5 minutes.
• Applies to: Increase USB transfer speed, fix USB transfer speed slow issue, make USB transfer faster.

'Does anyone know how to speed up USB transfer? I tried to transfer files from the computer to my USB drive. It lasted for 2hours, stuck at 99% complete, remaining 5 seconds. How do I make the file transferring speed faster?'

'USB transfer speed slow' is one of the commonest issues that may be encountered by users. To address this issue, we collected 6 ways for Windows 10/8/7 users to try and speed up the USB transfer rate immediately:

Also Read:

Overview of Slow USB Transfer Speed (Causes & Symptoms)

Generally, the USB transfer speed will slow down when you have one of the following issues:

• Unstable power supply in the USB port.
• Bad sectors slow down USB.
• USB file system slows in transferring big files.
• USB port is old, not compatible with a new USB drive.
• USB drive gets full, slows down in transferring files.

So how to judge if your USB is with a normal transferring speed or a slow one? Follow and check this out:

Ideally, USB 3.0 has a minimum transfer speed of 400MB per second while USB 2.0 is 35MB per second.

If your USB meets one of the above conditions, be it frozen in transferring files or doesn't reach its average speed, your USB is having slow data transfer rate.

How to Speed Up USB Transfer Rate in Windows 10/8/7 (6 Fixes)

Applies to: Speed up USB transfer windows 10, fix inconsistent USB transfer speed, increase USB-C transfer speed, USB 3.0 is slow.

To make the file transfer speed on your USB faster, try the recommended tips as listed below one by one. You'll successfully increase the transfer speed of a USB on Windows 10/8/7 on your own.

Method 1. Change USB Port, Connect Your USB to Rear Port (for Desktop Only)

Like most users, you may connect your USB to the front ports on the desktop computer to transfer files. However, the power supply of front ports may become unstable after using for a long period. Thus, the transfer speed goes down.

To speed up your USB transfer speed immediately, you can connect your USB flash drive to one of the rear ports on your computer instead. The rear ports are soldered on the motherboard of your computer, which provides a more stable power supply to your USB.

Here are the steps to connect USB to the rear port and speed up USB file transfer:

Step 1. Cancel the transferring process first.

Step 2. Right-click to eject the USB drive from the taskbar.

Step 3. Unplug the USB drive and reconnect it to the computer's back (rear) USB port.

After this, retry to transfer your files again and check out if the transferring speed goes up. Sometimes, connecting USB or external drive to the rear port also helps to solve problems like 'please insert a disk into removable disk', 'external hard drive light blinking but not working', etc.

If you think it's inconvenient, you can use a USB hub that also works to speed up your USB transfer.

Method 2. Recover Data, Format to Fix Soft Bad Sectors and Speed Up USB

Sometimes, your USB flash drive may slow down in reading and writing files with a certain number of soft bad sectors on your drive. The best way out is to recover files out of your USB and format to fix all the bad sectors so as to speed up USB.

How To Transfer Hard Drives

To do so, you have two phrases to go:

#1. Recover and Get All Files Out of USB

Reliable disk recovery software - EaseUS Data Recovery Wizard can fully scan your USB and get all data out of the USB flash drive or USB external disk with its quick and advanced scanning modes.

To make your USB faster in transferring files, follow the steps to get existing files and lost data from your USB first:

Step 1. Run USB data recovery software.

Connect the USB flash drive to your computer and launch EaseUS USB data recovery software on your PC. Select your USB drive which marks as a removable disk, and click 'Scan' to start finding your lost files.

Step 2. Scan all lost files from USB.

EaseUS Data Recovery Wizard will thoroughly scan your USB flash drive and find all your lost data on it. After the scanning process, use the Filter feature to filter a specific file type. You can check and preview found USB files in this program.

Step 3. Restore all lost files from USB.

Transfer Files From Phone To Hard Drive Backup

A double-click will allow you to preview the file results. Choose the target files and click 'Recover' to save them to a secure location on your PC or other external storage devices.

Remember to save the recovered data to another secure location on your computer.

#2. Format to Fix Bad Sectors and Speed Up USB

After getting the data, you can directly format the USB flash drive to gain a faster transfer speed. Here are the steps to format the USB device so to fix soft bad sectors and speed it up:

• Step 1: Connect USB to your PC and open'This PC'.
• Step 2: Locate and right-click on USB drive, select 'Format'.
• Step 3: Set the file system as 'NTFS', click 'Start', tick 'Quick Format' and click 'OK' to format USB.

Close the format window when the process completes. After this, you'll get a faster USB flash drive for file transfer. And you can save files back to your USB.

Method 3. Convert USB File System FAT32 to NTFS

Basically, most USB flash drives are set as FAT32 due to its high compatibility. However, as for the speed of file transfer, especially for transferring big files later than 4GB, NTFS works better.

Therefore, if your USB drive is FAT32 now, you can convert FAT32 to NTFS to increase your USB transfer speed.

Tollow the steps below to convert USB from FAT32 to NTFS immediately with CMD command line:

• Step 1: Click on'Start' and enter cmd.
• Step 2: Right-click 'Command Prompt' and choose 'Run as administrator'.
• Step 3: Type convert E: /fs:ntfs and hit 'Enter'. (Replace E: with the drive letter of your USB drive.)

Method 4. Optimize the Performance of USB

By optimizing the performance of your USB flash drive, you may have the chance to make its transfer speed faster. Here are the steps:

• Step 1: Right-click on the 'Windows' icon and select 'Device Manager'.
• Step 2: Expand 'Disk drives' in Device Manager, find your USB device, right-click on your USB device and choose 'Properties'.
• Step 3: Go to the 'Policies' tab, check 'Better performance', then click 'OK' to confirm that you want to optimize and improve your USB transfer speed.

After this, you can reboot your computer and then you should be able to use your USB drive and get a faster transfer speed by then.

Method 5. Update USB Drive Driver or Its Chipset Drivers

If you are using a laptop, the USB port you are using is usually connected to the chipset. Thus, if you want to want to solve the problem of 'USB transfer speed slow', you can try to update the USB driver or the chipset driver.

#1. To update USB driver:

• Step 1: Connect USB to PC, right-click 'This PC', select 'Manage' and click 'Device Manager'.
• Step 2: Expand 'Disk Drives'. Right-click your USB drive and choose 'Update driver'.
• Step 3: Shoose 'Scan automatically for updated driver software'.

#2. To update the USB chipset driver:

• Step 1: Connect USB to your PC, right-click the Windows icon, and select 'Device Manager'.
• Step 2: Expand 'System devices' and double-click the Intel chipset device in the list.
• Step 3: Switch to the 'Driver' tab and click 'Update Driver'.

Method 6. Enable USB 3.0 Drive in BIOS

Generally, the USB 3.0 port is enabled by default. If you have a USB 3.0 or 3.1 USB drive, but the USB transfer speed is slow, you should check and make sure the USB 3.0 is enabled in BIOS:

• Step 1:Restart your computer, press F2/Del keys to enter BIOS.
• Step 2: In BIOS, use the left and right arrow keys to choose the 'Advanced' tab.
• Step 3: Use the up and down arrow keys to choose 'USB Configuration' and hit 'Enter'.
• Step 4: If the option 'USB 3.0 (or 2.0) Support' is disabled, use the arrow keys to choose it and hit 'Enter'.
• Step 5: In the Options window, select 'Enabled' and press 'Enter'.
• Step 6: Press 'F10' to save the changes and exit BIOS.

Wait for your computer to boot into Windows as normal and you can reconnect your USB for file transferring again. If the USB support option is previously disabled, turning it on will greatly speed up your USB transfer.

The Bottom Line

Nowadays, most users use the USB 3.0 port, which has a maximum transfer speed of 400MB per second. If your computer USB port is too old (such as USB 1.1) while your USB is 3.1 or even higher level, it will highly slow down your USB speed. Switching to a new computer is a wise choice.

Honestly, when your USB transfer speed is slow, the most effective way to boost the transfer speed is in Method 1, 2, and 4. Mover, if you are still using USB 2.0, it's a good choice to switch to USB 3.0 instead.

No matter which tips you choose to fix the USB slow transfer rate error, it's important to back up your USB file first. As for the lost USB data, EaseUS Data Recovery Wizard is always ready to help.

People Also Ask About USB Slow Transfer Speed

Some of you may have more concerns about increasing USB transfer speed. Check out the questions and find answers below:

1. Why does USB transfer speed fluctuate?

As explained above, the USB transfer speed may get infected by many factors. Basically, there are the reasons why the USB transfer speed fluctuates:

• Read/write speed differs between computer and USB.
• The size of the transferred files differ. (Smaller files are faster to be transferred.)
• The difference between the computer USB port and your USB type. (USB 2.0 port slows USB 3.0 flash drive transfer rate.)

2. Does USB cable affect transfer speed?

Basically, the transfer speed of a USB is highly based on the following factors:

1. 1. USB type - USB 3.1/3.0/2.0
2. 2. The speed of computer RAW and hard disk speed.
3. 3. The CPU speed.

3. How long does it take to transfer a file size of 1GB on a USB 2.0 and a USB 3.0 drive?

Accordingly, the transfer speed of 1GB file to USB 2.0 is much slower than transferring to USB 3.0:

• Transfer 1GB files to USB 3.0 - 18 seconds;
• Transfer 1GB files to USB 2.0 - 3 mins 18 seconds.